Strike Face Lightweight Ceramic Plate for Bulletproof Vest
SKU BSBPV-PLATE Categories ,
BSBPV-PLATE

Ballistic Lightweight Ceramic Armor Plates - Level 4 Body Armor

5/5

This stunning set of standalone ballistic plate body armor functions at Level 4 (IV), and keeps you safe from handguns and rifles. Adding ballistic plates to your Level IIIA (3A) Bullet Proof Vest gives you the highest level of protection available. Made of combination of Polyethylene and Ceramic Alumina. Stand alone plate no need to add level IIIA soft panels. For only $249.95, this ceramic plate is great protection available for everyone. 5 Year Manufacturer’s Warranty and made by NIJ 0101.04 Standards. Single-Curve, SAPI/ESAPI-Cut and 6.8 lbs. (3.1 kg)

description

Ballistic Ceramic Armor Plates offer Level 4 (Level IV) protection when used in conjunction with bulletproof vests.

Adding Level 4 ballistic plates to your Level IIIA Bullet Proof Vest gives you the highest level of protection available. This combination protects you not only from handgun fire, but from rifle fire as well. Single-Curve, SAPI/ESAPI-Cut and 6.8 lbs. (3.1 kg), it is made of Monolithic Ceramic & Polyethylene and is 100% Made in Israel. A terrific choice of Level IV body armor that has a convenient Water Resistant Cover, it his made to be used as a front or back plate.

Caliber Protection

  • AK 47 7.62 mm x 36 mm PS
  • MI93,5.56 mm x 45 mm
  • SS109 5.56 mm x 45 mm
  • AK 47 7.62 mm x 36 mm APIBZ
  • 30.06,7.62 mm x 63 mm AP

The Ballistic Level 4 Ceramic armor Plate is only $249.00

This is a great deal for a combination Monolithic Ceramic & Polyethylene plate with a 5 year warranty.

Is this the best Level 4 Ballistic Armor Plate on the market?

Yes, and it is available at the best price. It is guaranteed to make your Level IIIA Vest into a Level 4 (IV) Vest. It weighs only 6.8 lbs, and is made from a ceramic material that contains alumina and High Strength Polyethylene. This plate is significantly lighter than a steel plate while comparable in price. The Strike Face Ceramic Ballistic Plate is a great value.

How many Ceramic Ballistic Plates should I buy?

It depends on how much protection you desire. SWAT teams and those who expect to be shot at from the front wear one ballistic plate in the chest pocket. Those who are in warzones wear two ballistic plates: one in the front pocket, and one in back. Analyze your unique situation to decide on how many plates you will need.

Is this a SAPI Plate?

Our plate is not currently in use by the US Military, but it offers protection similar to the Enhanced Small Arms Protection Insert (ESAPI) and more protection than the Small Arms Protection Insert (SAPI) plate. Our plate is the same size as the Medium SAPI and ESAPI plates and is the same weight as the ESAPI plate.

What is the protection level of this ceramic plate when used alone?

Our plate provides NIJ level III protection when used alone, such as in a plate carrier. This will protect against non-armor piercing .223 and 7.62 x 51mm rounds. For heavier rounds and level IV (4) protection, the plate needs to be used in conjunction with our bulletproof vest.

Does this ceramic plate fit in a bulletproof vest?

Yes.  This plate fits in both the front and rear plate pockets of all sizes of most bulletproof vests.

If you want a good middle ground between price and weight, ceramic is what you are looking for. Steel is heavy and doesn’t contain the bullet. This can cause the bullet to deflect to your face. It’s a sacrificial product so it will contain the bullet, locking it in. A lot lighter than steel. Steel is 9.5-11 lbs, ceramic plates are 6.8 lbs so almost half the weight. Our ceramics are a mosaic style, made out of a number of tiles.

Some ceramic plates don’t have anything on the face of them, so if you get shot the ceramic splatters all over the place causing lacerations. Our have polyethylene layer on the face so the splatter is minimal.

Protective Materials:Polyethylene and Ceramic Alumina
Protecting area:30 cm x 25 cm
Weight3.3 kg / 7 lb
Protection (NIJ 0101.04 Bullet):Level IV
Finish MaterialTextured Nylon
DesignShooter cut, single-curve

Specifications

Understanding the quality and levels of protection for a Bulletproof vest with and without Ceramic Plates

  1. Level of Protection

    Bullet proof vests are engineered, tested and rated at varying levels of protection. In general, higher means a greater level of protection. In order of lowest to the highest level, the ratings are as follows: IIA, II, IIA, III, IV. Typically, level IIIA with ballistic plates or level 4 (IV) are recommended.

    For reference, a Level II or IIA vest will be largely ineffective against rounds from a .45 or .40 S&W.

  2. Testing

    Speaking of ratings, you want to make sure the vest has actually been tested to have achieved that rating. Knock offs and cheap Chinese manufacturers have flooded the market with vests that may not provide the protection they advertise.

    What you want to look for is proof of testing that adheres to the National Institute of Justice’s testing procedures. These vests will be marked as NIJ certified. All of our vests meet or exceed NIJ testing for the ratings advertised.

  3. Sizing

    The fit of your vest is a critical aspect of protection and mobility. Too tight and it can hinder heavy breathing under duress while restricting tactical movement. Too loose and it can leave room for injury while also getting in the way of maneuvering. We offer a range of 6+ sizes to fit virtually any body size and frame. Reach out if you have questions. We’d be happy to help you get the right fit.

  4. Weight

    When it comes to body armor, there is often a tradeoff between overall weight and the level of protection offered. For example, adding ballistic plates to a Level III vest can dramatically improve its protective capability, but at the price of adding additional weight.

    Larger individuals or those who are more athletic may find additional weight negligible, while those with smaller frames (such as women) may need to consider the balance between protection and mobility.

  5. Ability to Upgrade or Customize

    For some, the ability to customize their outfit is an important consideration. Apart from the ability to accessorize, the most popular option is having additional pockets to hold ballistic plates.

  6. Build Quality

    When it comes to protection, you can’t skimp on quality. Whether you’re a first responder putting your vest through daily abuse, or a tactical weekend warrior, you need equipment that is built to last.

  7. Country of Origin

    Although quality vests can be found internationally, its important to note that many sites are selling knock offs, shoddy vests, and setups made from materials of inferior quality. Poor quality vests can result in catastrophic and sometimes fatal consequences. Don’t leave your safety up to a ‘no-name’ brand from just any website.

Screen Shot 2022 04 29 at 4.49.57 PM
Our ballistic plates stop .223 rounds. While most people don't usually associate ceramic plates with multi-shot capabilities, the idea that they are only good for one shot isn't true. The NIJ test for these plates is conducted with 6 shots in different locations and is successful with 3 stops in the same spot. These ceramic ballistic plates offer great protection for the price and weight.
Great upgrade for added protection!

I work for a state parole agency that issues only basic level II armor due to costs. I work in a large urban area with a caseload of repeat/violent offenders and gang members. I am frequently involved in LE Taskforce operations looking for parole violators and fugitives. I often feel out-gunned and under-protected. The plate added to my existing carrier offers a great balance of weight and protection. Very pleased.

Aaron Wery
Page divider